Onduleur PowerWalker VI 600 MS

The Uninterruptible Power Supply PowerWalker VI 600 MS is a line-interactive UPS with 0.6 kVA (360 W) output capacity designed to protect sensitive electronics in home and small office environments. It provides eight Type F AC outlets — four with battery backup for critical devices and four with bypass for non-critical loads. The unit includes an automatic voltage regulation (AVR) function to stabilise output during voltage fluctuations and a USB communication interface for monitoring and control. A 2.1 A USB charging port and a rear-accessible battery compartment for easy replacement are integrated into the compact black housing.

Advantages

The VI 600 MS offers combined battery-backed and bypass outlets in a single compact device, allowing selective protection of critical equipment while maintaining power to non-critical loads. Integrated AVR reduces the frequency of battery use by correcting voltage dips and surges. USB HID support enables basic monitoring without additional drivers, while full software control is available via a standard USB connection. The rear battery access simplifies maintenance and replacement.

Suitable for

• Home office setups and personal workstations
• Network attached storage (NAS) and small servers
• Routers, modems and network equipment
• Peripherals and sensitive electronics requiring short backup time

Key specifications

• Output power capacity: 0.6 kVA (360 W)
• AC outlets: 8 Type F (4 battery-backed, 4 bypass)
• Battery: 7 Ah (user-replaceable via rear panel)
• USB: communication (HID and software) and 2.1 A charging port
• Cooling: passive
• Weight: 4.4 kg
• Dimensions: 200 x 345 x 100 mm
• Colour: black

How to use

Place the UPS on a stable surface or mount it on a wall according to the included mounting instructions. Connect critical devices to the battery-backed outlets and non-critical equipment to the bypass outlets. Use the supplied USB cable to connect the UPS to a computer for monitoring and configuration or rely on USB HID mode for basic status information without additional drivers. The 2.1 A USB port can charge mobile devices while the UPS is operating.

Recommendations

The VI 600 MS is intended for short-term backup and voltage stabilisation for small setups; verify the combined power draw of connected devices does not exceed 360 W. For longer runtimes or higher loads, consider a UPS with greater capacity. Periodically check the battery condition and replace the 7 Ah battery when capacity declines.