Durable 102102 Durable 102102, hauteur 0,5 mm

Self-adhesive floor tape for long-term indoor marking of parking spaces, safety zones, walkways and driveways. Durable 102102 is a 0.5 mm thick tape available in high-visibility colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green and 5005 Signal blue. Roll dimensions: 50 mm × 30 m. Slip resistance meets R9 according to DIN 51130.

Advantages

The Durable 102102 tape offers long-term adhesion on clean, dry indoor floors and a uniform 0.5 mm thickness that maintains a flat profile under foot and light wheeled traffic. It is available in multiple signal colours for clear visual demarcation and conforms to slip-resistance class R9, supporting safer walking surfaces where applied.

Suitable for

• Marking parking spaces in indoor garages
• Defining safety zones and restricted areas
• Creating walkways and pedestrian routes
• Marking loading bays and driveways inside facilities

Key specifications

• Brand: Durable
• Manufacturer part number (MPN): 102102
• EAN: 4005546999760
• Thickness: 0.5 mm
• Width × Length: 50 mm × 30 m
• Colours: similar to RAL 9003, 3001, 1003, 6032, 5005
• Slip resistance: R9 (DIN 51130)

How to use

Ensure the floor surface is clean, dry and free of dust, oil and loose particles. Measure and mark the intended layout, then cut the tape to the required length. Peel off the backing and apply the tape by pressing it firmly onto the floor, smoothing out any air bubbles. For best adhesion, apply consistent pressure across the entire length and use a roller if available. Allow the adhesive to set before exposing the area to heavy traffic.

Recommendations

For optimal performance, apply the tape at room temperature on non-porous, well-prepared indoor surfaces. Avoid outdoor use or prolonged exposure to moisture and chemical cleaners. Periodically inspect marked areas and replace tape showing significant wear or lifting.