Pompe submersible Einhell GC-DP 7835

The Einhell GC-DP 7835 submersible pump is a compact, utility-focused water pump designed for drainage and water transfer tasks. Rated at 780 W, it provides a maximum flow capacity of 15,700 litres per hour and supports a maximum immersion depth of 7 m with a delivery head of up to 8 m. Housed in durable plastic and supplied with a 10 m power cord, the pump combines portability and practical performance for home, garden and light professional use. Its weight of 5.2 kg makes handling and temporary installations straightforward.

Advantages

The pump offers high flow rate relative to its size, enabling efficient removal of standing water and rapid emptying of tanks or basements. The 780 W motor delivers stable performance under continuous operation within recommended parameters, while the plastic housing resists corrosion and reduces overall weight. The included 10 m cable increases placement flexibility without additional extensions, and the 7 m maximum immersion allows work in deeper sumps or wells. The balanced combination of power, capacity and low weight makes the unit easy to transport and position.

Suitable for

• Draining flooded cellars, garages and basements
• Emptying garden ponds, pools and rainwater collection tanks
• Water transfer between containers or for temporary irrigation supply
• Construction sites for dewatering shallow excavations

Key specifications

• Power consumption: 780 W
• Maximum flow rate: 15,700 litres per hour
• Maximum delivery head (height): 8 m
• Maximum immersion depth: 7 m
• Housing material: durable plastic
• Cable length: 10 m
• Weight: 5.2 kg

How to use

Place the Einhell GC-DP 7835 on a stable surface in the water to be drained, ensuring the pump is fully submerged no deeper than the specified maximum immersion depth. Connect the outlet hose securely to the pump discharge and position the other end where water will be discharged. Plug the power cord into a residual-current device (RCD) protected socket and switch the pump on. Monitor the pump during initial operation to confirm correct priming and unobstructed water flow. After use, switch off the unit, disconnect the power, remove the pump from the water, drain any remaining water from the housing and store the pump in a dry place.

Recommendations

Use the pump for clean or lightly contaminated water and avoid pumping fluids with large solid particles or corrosive substances. Verify the water temperature and operating environment are within the manufacturer's recommended limits. For extended service life, rinse and dry the pump after use and inspect the housing and connections periodically for wear or damage.