Refroidissement liquide tout-en-un Alphacool Eisbaer 360 CPU

The Alphacool Eisbaer 360 CPU all-in-one liquid cooler provides closed-loop liquid cooling for desktop processors. Designed with a sleek black finish and three 120 mm fans, the unit combines a radiator, pump and pre-filled coolant to deliver continuous thermal management without the need for complex assembly. The cooler is compatible with a wide range of CPU sockets and is intended to replace air cooling solutions where lower temperatures and quieter operation are desired.

Advantages

The Eisbaer 360 offers effective heat dissipation across high-load workloads thanks to its 360 mm radiator and three 120 mm fans delivering up to 108 m³/h airflow per fan at 12 V. The pre-assembled loop reduces installation time and minimizes the risk of leaks during setup. Its compact pump and integrated cold plate provide direct contact with the CPU surface for efficient thermal transfer, while the black aesthetic ensures visual compatibility with most PC builds.

Suitable for

• Gaming desktop systems requiring sustained cooling under heavy CPU loads
• Workstations running multi-threaded applications and content creation tasks
• Compact to mid-tower cases that support a 360 mm radiator
• Users replacing stock air coolers for improved thermal performance and noise reduction

Key specifications

• Type: all-in-one liquid cooler with 360 mm radiator
• Fan diameter: 120 mm (three fans)
• Fan airflow: up to 108 m³/h per fan at 12 V
• Supported CPU sockets: broad compatibility across modern and legacy Intel and AMD sockets
• Colour: black
• Weight: approximately 3.027 kg

How to use

Mount the 360 mm radiator in a case location that supports triple 120 mm fans, align the fans for optimal airflow direction, and secure the radiator with the supplied screws. Attach the pump/block unit to the CPU using the matching socket brackets and thermal paste according to the motherboard and cooler instructions. Connect the fan and pump power cables to appropriate headers on the motherboard or fan controller, and verify pump operation and fan speeds in BIOS or monitoring software before running demanding workloads.

Recommendations

Install the cooler in a case with adequate airflow, maintain unobstructed intake and exhaust paths, and periodically check fan operation and radiator fins for dust. Use motherboard monitoring to ensure pump rpm stays within expected ranges and allow the system to idle briefly after assembly to confirm stable temperatures before prolonged heavy use.